Transparent November 2026 pricing on Marvin Elevate fiberglass-exterior / wood-interior replacement windows across Cape Ann, Newburyport, Andover, and the North Shore.
Select your window count and preferred brand series below to launch your itemized breakdown:
Marvin Elevate (formerly Marvin Integrity Wood-Ultrex) combines a warm, furniture-grade real pine interior with an Ultrex® pultruded fiberglass exterior that is 8x stronger than vinyl and 3x stronger than wood/vinyl composites. Because fiberglass expands and contracts at the exact same rate as insulated glass, Marvin Elevate resists seal failures even in extreme oceanfront salt air in Gloucester, Rockport, Marblehead, and Newburyport.
Unlike roll-formed aluminum cladding that can chalk or pit near salt water, Marvin's patented AAMA 624 acrylic finish on Ultrex® fiberglass resists fading, chalking, and coastal corrosion—even in Stone White, Ebony (Black), Bronze, and Cashmere finishes.
A 10-window Marvin Elevate insert package typically runs $17,800 – $23,800 installed through Pioneer (compared to $33,000 – $42,500 through luxury design showrooms). Full-frame tear-out with new interior casing adds $320–$420/window.
In November 2026, Marvin Elevate double-hung and casement windows cost $1,780 to $2,380 per window installed for standard insert replacement, or $2,100 to $2,800 per window for full-frame tear-out down to the studs with new interior and exterior trim.
Both are outstanding, but Marvin Elevate features a pultruded Ultrex® fiberglass exterior (8x stronger than vinyl) with an AAMA 624 coastal finish, making it the top architectural choice for direct oceanfront exposure in Gloucester, Rockport, Manchester-by-the-Sea, and Marblehead.
Yes. Marvin Elevate offers Tripane Low-E glass configurations that meet ENERGY STAR® Northern Zone and Mass Save® thermal requirements.
Pick your window count, compare Harvey, Mathews Brothers, Andersen, and Marvin side-by-side, and check your Mass Save® rebate eligibility online.
Open Instant Cost Calculator →